en espanol

Glass-Fused-to-Steel Technology

Glass-fused-to-steel is the premium technology in the tank market. Glass coating’s physical properties are specially suited to municipal and industrial storage applications. The factory-applied silica glass coating on Aquastore tanks forms a hard, inert barrier for both the interior and exterior tank surfaces to guard against weather and corrosion. Glass-fused-to-steel is impermeable to liquids and vapors, controls undercutting caused by corrosion and offers excellent impact and abrasion resistance. The color won’t fade or chalk and most graffiti can easily be removed. The Aquastore tank will significantly reduce the owner’s maintenance costs because it never requires sandblasting and repainting.

A multi-step process is the heart of the Aquastore glass-fused-to-steel technology system:
  • Fabricated sheets are grit blasted to a uniform, near white surface
  • Proprietary formulations of borosilicate, minerals, water and clays are blended into a sprayable slurry called “slip”
  • After inspection, the slurry is fused to the steel sheets at temperatures above 1,500° F to produce the distinctive glossy Aquastore finish
  • The molten glass reacts with the profiled steel surface to form an inert, inorganic chemical and mechanical bond
Technical Specifications:

glass-fused-to-steel

  • Inside Sheet Color
  • Outside Sheet Color
  • Normal Thickness
  • Service Range
  • Abrasion Resistance
  • Elasticity
  • Permeability
  • Thermal Conductivity
  • Clean-ability
  • Hardness
  • Adherence
  • Impact Resistance
  • Corrosion Resistance ASTM B-117
  • White
  • Cobalt Blue, Desert Tan, Forest Green, Sky Blue, White
  • Interior: 10-18 mils, 260-460 microns
  • Exterior: 7-15 mils, 180-380 microns
  • 140o F (60o C) @ 2-11 pH-subject to verification, depending on specific products stored
  • Taber-8 mg loss (CS-17, 100g, 100 cycles)
  • Young’s Modulus 12x106
  • Impermeable to gasses and liquids within normal operating temperature range
  • 20.4 BTU in/hr ft2 oF
  • Smooth, inert, glossy, anti-stick
  • 60 Mohs
  • Over 5,000 psi to base steel
  • 24 inch-lb.
  • Excellent, virtually unaffected by most waste waters, brines, sea water, sour crude, salt spray, organic and inorganic chemicals